Polybutylene
Replace older piping material
Whole-house PEX repiping can replace existing polybutylene water-distribution piping and reconnect fixtures to the new system.
Whole-house repiping
Whole-House PEX Repiping
Replace aging or problem water-supply piping with a new PEX distribution system. A. Plumbing Pro performs whole-house repiping for homes with polybutylene, recurring leaks, aging piping or other water-supply concerns.
Polybutylene ReplacementAging Water LinesRecurring LeaksResidential & Commercial
PEX water-supply repipingWhole-house water-supply replacement with fixture reconnections and project-specific access.
Licensed & Fully InsuredFlorida plumbing license CFC1427153
Serving Since 2006Established local plumbing company
1-Year Labor Warranty*Drain cleaning excluded
Permit CoordinationRequired permits pulled as applicable
When repiping makes sense
A planned replacement can address an entire aging water-supply system.
Customers commonly contact us about polybutylene replacement, repeated leaks and older piping they want to replace rather than continue repairing section by section.
Leaks
Recurring water-line problems
When leaks are occurring in an aging distribution system, a whole-house approach may be considered instead of isolated repairs.
Aging system
Planned piping replacement
Some owners choose to replace older water lines proactively as part of a larger improvement or before additional failures occur.
Scope of work
What a whole-house PEX repipe generally includes.
✓
New hot- and cold-water distribution pipingExisting water-supply piping is replaced with new PEX according to the approved scope.
✓
Fixture reconnectionsPlumbing fixtures are reconnected to the new water-distribution system.
✓
Valves and supply connections as scopedShutoff valves and supply connections may be replaced based on condition, compatibility and proposal scope.
✓
Permit and inspection work when requiredApplicable plumbing permits are pulled and the work is completed for required inspections.
Not normally included
Drain and vent piping
A water-supply repipe replaces hot- and cold-water distribution piping. Drain and vent systems are not normally part of that scope.
Finish work
Drywall and finish repair
Drywall, texture, painting and other finish repairs are generally completed by the appropriate contractor unless specifically included in the plumbing proposal.
During the project
Access is necessary, but the goal is to keep disruption controlled.
PEX flexibility can reduce the size and number of openings compared with more rigid piping, although access requirements vary by the home's construction and layout.
Plan routing & accessDetermine how the new piping can reach fixtures and where wall or ceiling openings are necessary.
Install new PEXRoute new hot- and cold-water lines and complete the project-specific distribution system.
Reconnect & restore waterWater is shut off during connection work. When possible, service is restored at the end of each workday.
Inspection & finish coordinationComplete required plumbing inspections and coordinate drywall/finish repair as appropriate.
i
Can you stay in the home?
In most cases, yes. Homeowners often remain in the house during a repipe, but there will be periods without water and areas of the home must remain accessible to the crew.
Behind the walls
Actual water-supply piping work.
PEX repiping is mostly hidden when finished, so showing the in-progress work helps customers understand why access is part of the project.
Frequently asked questions
Whole-house repiping questions.
Exact timing, access and component replacement depend on the home and the agreed proposal.
What is included in a whole-house PEX repipe?
A whole-house repipe generally replaces the existing hot- and cold-water distribution piping with new PEX and reconnects the plumbing fixtures. The exact scope can also include fixture shutoff valves, supply connections and other components specified in the proposal. Drain and vent piping are not normally part of a water-supply repipe.
How long does a whole-house repiping project usually take?
Most whole-house repiping projects can be completed within one to several days. Timing depends on the size and layout of the home, number of fixtures, accessibility and the amount of wall or ceiling access required.
Will the home’s water need to be turned off during the project?
Yes. Water must be shut off while portions of the new system are connected. We work to minimize downtime and, when possible, restore water service at the end of each workday.
How much wall or ceiling access is typically required?
PEX is flexible and can often be routed with smaller and fewer access openings than more rigid piping. Some drywall or ceiling access is usually necessary, and the amount depends on the construction and layout of the home.
Who repairs the drywall after the repipe?
Drywall and finish repairs are generally performed by a drywall or remodeling contractor unless specifically included in the plumbing proposal. A. Plumbing Pro makes the openings needed for the plumbing work and can coordinate with other trades when appropriate.
Does a whole-house repipe require a permit and inspections?
Permit and inspection requirements depend on the jurisdiction and scope. When required, the work must be completed to the applicable plumbing code and approved by the local authority.
Will the existing shutoff valves and supply lines be replaced?
Fixture shutoff valves and supply connections may be replaced based on age, condition, compatibility and the agreed project scope. Deteriorated, corroded or unsuitable components are generally recommended for replacement.
What warranties are available on the piping and labor?
PEX manufacturers typically provide limited warranties on approved piping and components when properly installed; terms vary by brand and system. A. Plumbing Pro provides a one-year labor warranty on qualifying work.
Can the home remain occupied during the repiping project?
In most cases, yes. There will be periods when water is unavailable, and portions of the home must remain accessible to the plumbing crew during the project.
Planning a whole-house repipe?
Request a free estimate for a planned repiping project. We can review the existing piping, home layout and project scope before preparing the proposal.